©bongkarn thanyakij via Canva.com
Webinar - IoT design space challenge: Simulating the power consumption and timing
This Webinar is over| Date | Nov 10, 2016 |
| Time | 05:00 AM EDT |
| Cost | Free |
|
Online
|
The two biggest challenge facing an Internet of Things (IoT) designer are low power and reduced network traffic. To increase the battery life, the designer must explore and select the low power mode offered from the sensor to the RF transceiver, RTOS and software task scheduling for Dynamic Voltage Frequency Scaling.
Both of these requirements can only be architected with well-defined discrete-event simulation and analysis. VisualSim IoT Modeling and Simulation Platform provides agent based system design platform to predict performance, power and behavior of a complete IoT platform with hundreds or thousands of connected devices.
In this webinar we will demonstrate the application of system modeling to designing the sensor processing, hub management, and topology selection. We will go through the process of defining the SoC and the network in model, assign use cases and workloads, and interpret the reports. At the end of the Webinar, engineers and manager will understand the use of VisualSim in designing IoT systems.
Key Takeaways:
1. Use system simulation to determine the latency and power consumed of a network of IoT devices
2. Architect the hardware and software to meet end-to-end application timing deadline from IoT to the data center
3. Selection of components based on simulation results
4. Network bandwidth allocation and workload definitions
Both of these requirements can only be architected with well-defined discrete-event simulation and analysis. VisualSim IoT Modeling and Simulation Platform provides agent based system design platform to predict performance, power and behavior of a complete IoT platform with hundreds or thousands of connected devices.
In this webinar we will demonstrate the application of system modeling to designing the sensor processing, hub management, and topology selection. We will go through the process of defining the SoC and the network in model, assign use cases and workloads, and interpret the reports. At the end of the Webinar, engineers and manager will understand the use of VisualSim in designing IoT systems.
Key Takeaways:
1. Use system simulation to determine the latency and power consumed of a network of IoT devices
2. Architect the hardware and software to meet end-to-end application timing deadline from IoT to the data center
3. Selection of components based on simulation results
4. Network bandwidth allocation and workload definitions
Create your own event
Turn your passion into a business.
Turn your passion into a business.